Home / ese / {Official} Engineering Services Exam Syllabus – CIVIL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

{Official} Engineering Services Exam Syllabus – CIVIL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

Engineering Services Exam 2019 (IES/ESE 2019)  Syllabus

PRELIMINARY+MAINS (CIVIL ENGINEERING PAPER)

As per the latest notification by UPSC total 3 stages will be there in Engineering Services Exam 2019 i.e Preliminary (Pre), Mains and Personality Test.

Table-1
Stages Examination Marks
Stage-I Preliminary Exam (Objective) 0500
Stage-II Mains Exam (Conventional) 0600
Stage-III Personality Test 0200
Stage-I + Stage-II + Stage-III Grand Total 1300

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

Preliminary/Stage-I Examination IES – General Studies And Engineering Aptitude Exam
Before IES Civil Engineering Objective Exam there will be a exam of 200 marks on the same day of General Studies And Engineering Aptitude. This exam will be of 200 marks and this is the compulsory exam and will be common to all branch. ESE GS and EA is the non technical paper exam in engineering services exam introduced from IES 2019. For More Details : Click Here
Preliminary/Stage-I Examination (Civil Engineering Objective Type Papers) :
Civil Engineering Preliminary Engineering Discipline paper will be of 3 hours with 300 maximim marks. It will be objective paper. It will be made by combining Civil Engineering Paper 1 and Civil Engineering Paper 2 Syllabus mentioned below.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
Mains/Stage-II Examination (Civil Engineering Objective Type Papers) :
Civil Engineering Mains Engineering Discipline paper will be of 600 marks. Civil Engineering Conventional Paper 1 – 300 Marks and 3 Hours time limit and Civil Engineering Conventional Paper 2 – 300 Marks and 3 Hours time limit. It will be Conventional (Theory+Numerical+Derivation) paper.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

ESE Civil Engineering Examination Paper 1 Syllabus :

The questions from the following Topics will be set in Paper 1

  1. Building Materials:

Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties and selection criteria;

Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design.

  1. Solid Mechanics:

Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.

  1. Structural Analysis:

Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concept of bending and shear stresses;

Analysis of determinate and indeterminate structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi degree freedom system; Suspended Cables; Concepts and use of Computer Aided Design.

  1. Design of Steel Structures:

Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.

  1. Design of Concrete and Masonry structures:

Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases; Principles of pre-stressed concrete design including materials and methods; Earthquake resistant design of structures; Design of Masonry Structure.

  1. Construction Practice, Planning and Management:

Construction – Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Types of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and welfare.

Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

ESE Civil Engineering Examination Paper 2 Syllabus :

The questions from the following Topics will be set in Paper-2

  1. Flow of Fluids, Hydraulic Machines and Hydro Power:

(a) Fluid Mechanics, Open Channel Flow, Pipe Flow:

Fluid properties; Dimensional Analysis and Modeling; Fluid dynamics including flow kinematics and measurements; Flow net; Viscosity, Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow controls. Hydraulic jump; Surges; Pipe networks.

(b) Hydraulic Machines and Hydro power –

Various pumps, Air vessels, Hydraulic turbines – types, classifications & performance parameters; Power house – classification and layout, storage, pondage, control of supply.

  1. Hydrology and Water Resources Engineering:

Hydrological cycle, Ground water hydrology, Well hydrology and related data analysis; Streams and their gauging; River morphology; Flood, drought and their management; Capacity of Reservoirs. Water Resources Engineering : Multipurpose uses of Water, River basins and their potential; Irrigation systems, water demand assessment; Resources – storages and their yields; Water logging, canal and drainage design, Gravity dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross drainage works and head-works and their design; Concepts in canal design, construction & maintenance; River training, measurement and analysis of rainfall.

  1. Environmental Engineering:

(a) Water Supply Engineering:

Sources, Estimation, quality standards and testing of water and their treatment; Rural, Institutional and industrial water supply; Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand;

Drinking water Standards, Water Treatment Plants, Water distribution networks.

(b) Waste Water Engineering:

Planning & design of domestic waste water, sewage collection and disposal; Plumbing Systems. Components and layout of sewerage system; Planning & design of Domestic Waste-water disposal system; Sludge management including treatment, disposal and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.

(c) Solid Waste Management:

Sources & classification of solid wastes along with planning & design of its management system; Disposal system, Beneficial aspects of wastes and Utilization by Civil Engineers.

(d) Air, Noise pollution and Ecology:

Concepts & general methodology.

  1. Geo-technical Engineering and Foundation Engineering :

(a)Geo-technical Engineering: Soil exploration – planning & methods, Properties of soil, classification, various tests and inter-relationships; Permeability & Seepage, Compressibility, consolidation and Shearing resistance, Earth pressure theories and stress distribution in soil; Properties and uses of geo-synthetics.

 (b)Foundation Engineering: Types of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, Earthen embankments, Dams and Earth retaining structures: types, analysis and design, Principles of ground modifications.

  1. Surveying and Geology:

(a) Surveying: Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment and buildings, Setting out of Curves.

(b) Geology: Basic knowledge of Engineering geology & its application in projects.

  1. Transportation Engineering:

Highways – Planning & construction methodology, Alignment and geometric design; Traffic Surveys and Controls; Principles of Flexible and Rigid pavements design.

Tunneling – Alignment, methods of construction, disposal of muck, drainage, lighting and ventilation.

Railways Systems – Terminology, Planning, designs and maintenance practices; track modernization.

Harbours – Terminology, layouts and planning.

Airports – Layout, planning & design.

Engineering Services Exam Syllabus And Notes
GATE+IES+PSU Topper Notes  Click Here
IES Stage-1 Paper-1 (General Studies And Engineering Aptitude)  Click Here
IES Civil Engineering Syllabus Download  Click Here
 

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

 
SELECT YOUR BRANCH :-
GATE 2018 Information
1. GATE 2018 - MECHANICAL ENGINEERING
2. GATE 2018 - ELECTRONICS AND COMMUNICATION ENGINEERING
3. GATE 2018 - ELECTRICAL ENGINEERING
4. GATE 2018 - CIVIL ENGINEERING
5. GATE 2018 - COMPUTER SCIENCE ENGINEERING
6. GATE 2018 - INSTRUMENTATION ENGINEERING
7. GATE 2018 - CHEMICAL ENGINEERING
 
IES 2018 Information
1. IES 2018 - MECHANICAL ENGINEERING
2. IES 2018 - ELECTRONICS AND COMMUNICATION
3. IES 2018 - CIVIL ENGINEERING
4. IES 2018 ELECTRICAL ENGINEERING
...

About gatepsu.in

GATEPSU.IN Is The No- 01 Website For Self Preparation. We have daily 2Lakh Plus Visitors.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!