Home / ese / {Official} Engineering Services Exam Syllabus – ELECTRICAL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

{Official} Engineering Services Exam Syllabus – ELECTRICAL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

Engineering Services Exam 2019 (IES/ESE 2019)  Syllabus

PRELIMINARY+MAINS (ELECTRICAL ENGINEERING PAPER)

As per the latest notification by UPSC total 3 stages will be there in Engineering Services Exam 2019 i.e Preliminary (Pre), Mains and Personality Test.

Table-1
Stages Examination Marks
Stage-I Preliminary Exam (Objective) 0500
Stage-II Mains Exam (Conventional) 0600
Stage-III Personality Test 0200
Stage-I + Stage-II + Stage-III Grand Total 1300

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

Preliminary/Stage-I Examination IES – General Studies And Engineering Aptitude Exam
Before IES Electrical Engineering Objective Exam there will be a exam of 200 marks on the same day of General Studies And Engineering Aptitude. This exam will be of 200 marks and this is the compulsory exam and will be common to all branch. ESE GS and EA is the non technical paper exam in engineering services exam introduced from IES 2019. For More Details : Click Here
Preliminary/Stage-I Examination (Electrical Engineering Objective Type Papers) :
Electrical Engineering Preliminary Engineering Discipline paper will be of 3 hours with 300 maximim marks. It will be objective paper. It will be made by combining Electrical Engineering Paper 1 and Electrical Engineering Paper 2 Syllabus mentioned below.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
Mains/Stage-II Examination (Electrical Engineering Conventional Type Papers) :
Electrical Engineering Mains Engineering Discipline paper will be of 600 marks. Electrical Engineering Conventional Paper 1 – 300 Marks and 3 Hours time limit and Electrical Engineering Conventional Paper 2 – 300 Marks and 3 Hours time limit. It will be Conventional (Theory+Numerical+Derivation) paper.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
 

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

ESE Electrical Engineering Examination Paper 1 Syllabus :

The questions from the following Topics will be set in Paper 1

1. Engineering Mathematics:

Matrix theory, Eigen values & Eigen vectors, system of linear equations, Numerical methods for solution of non-linear algebraic equations and differential equations, integral calculus, partial derivatives, maxima and minima, Line, Surface and Volume Integrals. Fourier series, linear, nonlinear and partial differential equations, initial and boundary value problems, complex variables, Taylor’s and Laurent’s series, residue theorem, probability and statistics fundamentals, Sampling theorem, random variables, Normal and Poisson distributions, correlation and regression analysis.

2. Electrical Materials:

Electrical Engineering Materials, crystal structures and defects, ceramic materials, insulating materials, magnetic materials – basics, properties and applications; ferrities, ferro-magnetic materials and components; basics of solid state physics, conductors; Photo-conductivity; Basics of Nano materials and Superconductors.

3. Electric Circuits and Fields:

Circuit elements, network graph, KCL, KVL, Node and Mesh analysis, ideal current and voltage sources, Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorems, transient response of DC and AC networks, Sinusoidal steady state analysis, basic filter concepts, two-port networks, three phase circuits, Magnetically coupled circuits, Gauss Theorem, electric field and potential due to point, line, plane and spherical charge distributions, Ampere’s and Biot-Savart’s laws; inductance, dielectrics, capacitance; Maxwell’s equations.

4. Electrical and Electronic Measurements:

Principles of measurement, accuracy, precision and standards; Bridges and potentiometers; moving coil, moving iron, dynamometer and induction type instruments, measurement of voltage, current, power, energy and power factor, instrument transformers, digital voltmeters and multi-meters, phase, time and frequency measurement, Q-meters, oscilloscopes, potentiometric recorders, error analysis, Basics of sensors, Transducers, basics of data acquisition systems

5. Computer Fundamentals:

Number systems, Boolean algebra, arithmetic functions, Basic Architecture, Central Processing Unit, I/O and Memory Organisation; peripheral devices, data represenation and programming, basics of Operating system and networking, virtual memory, file systems; Elements of programming languages, typical examples.

6. Basic Electronics Engineering:

Basics of Semiconductor diodes and transistors and characteristics, Junction and field effect transistors (BJT, FET and MOSFETS), different types of transistor amplifiers, equivalent circuits and frequency response; oscillators and other circuits, feedback amplifiers.

Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

 

ESE Electrical Engineering Examination Paper 2 Syllabus :

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

The questions from the following Topics will be set in Paper-2

1. Analog and Digital Electronics:

Operational amplifiers – characteristics and applications, combinational and sequential logic circuits, multiplexers, multi-vibrators, sample and hold circuits, A/D and D/A converters, basics of filter circuits and applications, simple active filters; Microprocessor basics- interfaces and applications, basics of linear integrated circuits; Analog communication basics, Modulation and demodulation, noise and bandwidth, transmitters and receivers, signal to noise ratio, digital communication basics, sampling, quantizing, coding, frequency and time domain multiplexing, power line carrier communication systems.

2. Systems and Signal Processing :

Representation of continuous and discrete-time signals, shifting and scaling operations, linear, time-invariant and causal systems, Fourier series representation of continuous periodic signals, sampling theorem, Fourier and Laplace transforms, Z transforms, Discrete Fourier transform, FFT, linear convolution, discrete cosine transform, FIR filter, IIR filter, bilinear transformation.

3. Control Systems:

Principles of feedback, transfer function, block diagrams and signal flow graphs, steady-state errors, transforms and their applications; Routh-hurwitz criterion, Nyquist techniques, Bode plots, root loci, lag, lead and lead-lag compensation, stability analysis, transient and frequency response analysis, state space model, state transition matrix, controllability and observability, linear state variable feedback, PID and industrial controllers.

4. Electrical Machines :

Single phase transformers, three phase transformers – connections, parallel operation, auto-transformer, energy conversion principles, DC machines – types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors, Induction motors – principles, types, performance characteristics, starting and speed control, Synchronous machines – performance, regulation, parallel operation of generators, motor starting, characteristics and applications, servo and stepper motors.

5. Power Systems :

Basic power generation concepts, steam, gas and water turbines, transmission line models and performance, cable performance, insulation, corona and radio interference, power factor correction, symmetrical components, fault analysis, principles of protection systems, basics of solid state relays and digital protection; Circuit breakers, Radial and ring-main distribution systems, Matrix representation of power systems, load flow analysis, voltage control and economic operation, System stability concepts, Swing curves and equal area criterion. HVDC transmission and FACTS concepts, Concepts of power system dynamics, distributed generation, solar and wind power, smart grid concepts, environmental implications, fundamentals of power economics.

6. Power Electronics and Drives :

Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs – static characteristics and principles of operation, triggering circuits, phase control rectifiers, bridge converters – fully controlled and half controlled, principles of choppers and inverters, basis concepts of adjustable speed dc and ac drives, DC-DC switched mode converters, DC-AC switched mode converters, resonant converters, high frequency inductors and transformers, power supplies.

Engineering Services Exam Syllabus And Notes
GATE+IES+PSU Topper Notes  Click Here
IES Stage-1 Paper-1 (General Studies And Engineering Aptitude)  Click Here
IES Electrical Engineering Syllabus Download  Click Here
 

Every day counts.... Don't waste time.... Prepare With Toppersuurt88ur Be a Part of GATE-IES-PSUs 2018-2019 Success Journey

Like Us On Facebook

 
SELECT YOUR BRANCH :-
GATE 2018 Information
1. GATE 2018 - MECHANICAL ENGINEERING
2. GATE 2018 - ELECTRONICS AND COMMUNICATION ENGINEERING
3. GATE 2018 - ELECTRICAL ENGINEERING
4. GATE 2018 - CIVIL ENGINEERING
5. GATE 2018 - COMPUTER SCIENCE ENGINEERING
6. GATE 2018 - INSTRUMENTATION ENGINEERING
7. GATE 2018 - CHEMICAL ENGINEERING
 
IES 2018 Information
1. IES 2018 - MECHANICAL ENGINEERING
2. IES 2018 - ELECTRONICS AND COMMUNICATION
3. IES 2018 - CIVIL ENGINEERING
4. IES 2018 ELECTRICAL ENGINEERING
...

About gatepsu.in

GATEPSU.IN Is The No- 01 Website For Self Preparation. We have daily 2Lakh Plus Visitors.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!