Home / ESE / {Official} Engineering Services Exam Syllabus – MECHANICAL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

{Official} Engineering Services Exam Syllabus – MECHANICAL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019

0 Shares

Engineering Services Exam 2019 (IES/ESE 2019)  Syllabus

PRELIMINARY+MAINS (MECHANICAL ENGINEERING PAPER)

As per the latest notification by UPSC total 3 stages will be there in Engineering Services Exam 2019 i.e Preliminary (Pre), Mains and Personality Test.

Table-1
Stages Examination Marks
Stage-I Preliminary Exam (Objective) 0500
Stage-II Mains Exam (Conventional) 0600
Stage-III Personality Test 0200
Stage-I + Stage-II + Stage-III Grand Total 1300
Preliminary/Stage-I Examination IES – General Studies And Engineering Aptitude Exam
Before IES Mechanical Engineering Objective Exam there will be a exam of 200 marks on the same day of General Studies And Engineering Aptitude. This exam will be of 200 marks and this is the compulsory exam and will be common to all branch. ESE GS and EA is the non technical paper exam in engineering services exam introduced from IES 2019. For More Details : Click Here
Preliminary/Stage-I Examination (Mechanical Engineering Objective Type Papers) :
Mechanical Engineering Preliminary Engineering Discipline paper will be of 3 hours with 300 maximim marks. It will be objective paper. It will be made by combining Mechanical Engineering Paper 1 and Mechanical Engineering Paper 2 Syllabus mentioned below.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
Mains/Stage-II Examination (Mechanical Engineering Objective Type Papers) :
Mechanical Engineering Mains Engineering Discipline paper will be of 600 marks. Mechanical Engineering Conventional Paper 1 – 300 Marks and 3 Hours time limit and Mechanical Engineering Conventional Paper 2 – 300 Marks and 3 Hours time limit. It will be Conventional (Theory+Numerical+Derivation) paper.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
 
ESE Mechanical Engineering Examination Paper 1 Syllabus :

The questions from the following Topics will be set in Paper 1

Fluid Mechanics: Basic Concepts and Properties of Fluids, Manometry, Fluid Statics, Buoyancy, Equations of Motion, Bernoulli’s equation and applications, Viscous flow of incompressible fluids, Laminar and Turbulent flows, Flow through pipes and head losses in pipes.

Thermodynamics and Heat transfer: Thermodynamic systems and processes; properties of pure substance; Zeroth, First and Second Laws of Thermodynamics; Entropy, Irreversibility and availability; analysis of thermodynamic cycles related to energy conversion: Rankine, Otto, Diesel and Dual Cycles; ideal and real gases; compressibility factor; Gas mixtures. Modes of heat transfer, Steady and unsteady heat conduction, Thermal resistance, Fins, Free and forced convection, Correlations for convective heat transfer, Radiative heat transfer – Radiation heat transfer coefficient; boiling and condensation, Heat exchanger performance analysis

IC Engines, Refrigeration and Air conditioning: SI and CI Engines, Engine Systems and Components, Performance characteristics and testing of IC Engines; Fuels; Emissions and Emission Control, Vapour compression refrigeration, Refrigerants and Working cycles, Compressors, Condensers, Evaporators and Expansion devices, Other types of refrigeration systems like Vapour Absorption, Vapour jet, thermo electric and Vortex tube refrigeration. Psychometric properties and processes, Comfort chart, Comfort and industrial air conditioning, Load calculations and Heat pumps.

Turbo Machinery: Reciprocating and Rotary pumps, Pelton wheel, Kaplan and Francis Turbines, velocity diagrams, Impulse and Reaction principles, Steam and Gas Turbines, Theory of Jet Propulsion – Pulse jet and Ram Jet Engines, Reciprocating and Rotary Compressors – Theory and Applications

Power Plant Engineering: Rankine and Brayton cycles with regeneration and reheat, Fuels and their properties, Flue gas analysis, Boilers, steam turbines and other power plant components like condensers, air ejectors, electrostatic precipitators and cooling towers – their theory and design, types and applications;

Renewable Sources of Energy: Solar Radiation, Solar Thermal Energy collection – Flat Plate and focussing collectors their materials and performance, Solar Thermal Energy Storage, Applications – heating, cooling and Power Generation; Solar Photovoltaic Conversion; Harnessing of Wind Energy, Bio-mass and Tidal Energy – Methods and Applications, Working principles of Fuel Cells.

Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2019 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

 

ESE Mechanical Engineering Examination Paper 2 Syllabus :

The questions from the following Topics will be set in Paper-2

Engineering Mechanics: Analysis of System of Forces, Friction, Centroid and Centre of Gravity, Dynamics; Stresses and Strains-Compound Stresses and Strains, Bending Moment and Shear Force Diagrams, Theory of Bending Stresses-Slope and deflection-Torsion, Thin and thick Cylinders, Spheres.

Engineering Materials: Basic Crystallography, Alloys and Phase diagrams, Heat Treatment, Ferrous and Non Ferrous Metals, Non metallic materials, Basics of Nano-materials, Mechanical Properties and Testing, Corrosion prevention and control

Mechanisms and Machines: Types of Kinematics Pair, Mobility, Inversions, Kinematic Analysis, Velocity and Acceleration Analysis of Planar Mechanisms, CAMs with uniform acceleration and retardation, cycloidal motion, oscillating followers; Vibrations –Free and forced vibration of undamped and damped SDOF systems, Transmissibility Ratio, Vibration Isolation, Critical Speed of Shafts. Gears – Geometry of tooth profiles, Law of gearing, Involute profile, Interference, Helical, Spiral and Worm Gears, Gear Trains- Simple, compound and Epicyclic; Dynamic Analysis – Slider – crank mechanisms, turning moment computations, balancing of Revolving & Reciprocating masses, Gyroscopes –Effect of Gyroscopic couple on automobiles, ships and aircrafts, Governors.

Design of Machine Elements: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as riveted, welded and bolted joints. Shafts, Spur gears, rolling and sliding contact bearings, Brakes and clutches, flywheels.

Manufacturing , Industrial and Maintenance Engineering: Metal casting-Metal forming, Metal Joining, Machining and machine tool operations, Limits, fits and tolerances, Metrology and inspection, computer Integrated manufacturing, FMS, Production planning and Control, Inventory control and operations research – CPM-PERT. Failure concepts and characteristics-Reliability, Failure analysis, Machine Vibration, Data acquisition, Fault Detection, Vibration Monitoring, Field Balancing of Rotors, Noise Monitoring, Wear and Debris Analysis, Signature Analysis, NDT Techniques in Condition Monitoring.

Mechatronics and Robotics: Microprocessors and Microcontrollers: Architecture, programming, I/O, Computer interfacing, Programmable logic controller. Sensors and actuators, Piezoelectric accelerometer, Hall effect sensor, Optical Encoder, Resolver, Inductosyn, Pneumatic and Hydraulic actuators, stepper motor, Control Systems- Mathematical modeling of Physical systems, control signals, controllability and observability. Robotics, Robot Classification, Robot Specification, notation; Direct and Inverse
Kinematics; Homogeneous Coordinates and Arm Equation of four Axis SCARA Robot.

Engineering Services Exam Syllabus And Notes
GATE+IES+PSU Topper Notes  Click Here
IES Stage-1 Paper-1 (General Studies And Engineering Aptitude)  Click Here
IES Mechanical Engineering Syllabus Download  Click Here
 
0 Shares

Review {Official} Engineering Services Exam Syllabus – MECHANICAL ENGINEERING Paper 1 + Paper 2 – IES/ESE 2019.

Your email address will not be published. Required fields are marked *

Check Also

{Official} IES 2019 GS&EA Question Paper, Solution And Analysis – Engineering Services Exam

UPSC ESE 2019 General Studies And Engineering Aptitude examination was successfully held on January 6 and the …

error: Content is protected !!